Archive for October, 2008

« Previous Entries
Next Entries »
Angle Hose Valves
Posted in Fire Sprinkler Supplies | No Comments »
Angle hose valves feature all brass construction with cast bodies for rigidity and light weight. Rated to 300 lbs. these valves can be used with a Fire Hose Rack Assembly or as a fire department connection outlet. UL, FM Approved.
Model Size
900-01130 2-1/2″ FNPT x MNST
Hose Valve
900-01140 2-1/2″ x FNPT
Hose Valve N.Y.
Corp Thread
900-01120 1-1/2″ FNPT x MNST
Hose Valve

1/2″-2″ IPS Angle Globe Valves
Posted in Fire Sprinkler Supplies | No Comments »
Manufactured from cast brass, these angle valves are made for trim or drain applications and designed to be suitable for all sprinkler systems including high pressure systems. The soft seat design utilizes NBR Nancar N70 material for positive sealing to 300 psi. The most common use for the 2″ IPS size is as a system drain at the riser. May be used on both alarm valve and shotgun riser assemblies.

  • Cast Brass: Body, Bonnet.
  • Brass B16: Gland Holder, Stem, Washer.
  • Stainless Steel: Nut
  • UL/ULc Listed
    		•
    Model Size
    900-01880 1/2″
    900-01890 3/4″
    900-01900 1″
    900-01910 1-1/4″
    900-01920 1-1/2″
    900-01930 2″

    Bronze Globe Valve
    Posted in Fire Sprinkler Supplies | No Comments »
    Bronze Globe Valves are specifically designed for use in fire sprinkler systems. Typical use is in trim or drain applications.

  • Material: Brass or bronze, Seat-Teflon

    Swing Check Valve
    Posted in Fire Sprinkler Supplies | No Comments »
    Full Floating Clapper Assembly

    Small pipe diameter check valves are made from brass and feature a full floating clapper assembly with soft seat. Clapper design assures proper clapper seating during valve cycle.

  • Valve Body: Cast Brass (85-5-5-5)
  • Clapper Assembly: Forged Brass
  • Seat: NBR (Chloramine Resistant)
  • Sizes: 1/2″ IPS-2″ IPS, Female by Female
  • Rated Pressure: 175 psi
    		•
    Model Size
    900-01940 1/2″
    900-01950 3/4″
    900-01960 1″
    900-01970 1-1/4″
    900-0198

    900-01990

    0

    		 1-1/2″2″

    Ball Valve
    Posted in Fire Sprinkler News | No Comments »
    Full Port, 600 psi

    The 1/4″ IPS three-way female threaded valve is used to facilitate the installation of sprinkler system pressure gauges. The valve provides for one inlet and two outlets. This design allows for replacement of the system gauge without shutting down the water supply to the sprinkler system.

  • Forged brass.
  • Hard chrome plated bronze ball.
  • 150 PSI WSP, 600 PSI non-shock WOG.
  • For use with temperatures from -20

    Three-Way Bronze Valve
    Posted in Fire Sprinkler Fabrication, Fire Sprinkler Fittings | No Comments »
    1/4″ IPS

    The 1/4″ IPS three-way female threaded valve is used to facilitate the installation of sprinkler system pressure gauges. The valve provides for one inlet and two outlets. This design allows for replacement of the system gauge without shutting down the water supply to the sprinkler system.

  • Material: Body-Bronze, Seat-Brass, Handwheel-Iron
  • Finish: Rough Brass
  • Working Pressure: 300 WOG
    		•
    Model Size
    900-01850 1/4″

    Tru-Drill Hole Hough
    Posted in Fire Sprinkler Pipe | No Comments »
  • Low Price/High Quality
  • Permanently attached dual drive handles.
  • Built in small and large adapters.
  • Sub-Compact light weight design.
  • Dual direction base unit.
  • Secure grounding of electric drill to pipe.
  • Rack and pinion gear drive advancement.
  • Easily mounted with quick fit chain.
  • Available with either Milwaukee or Dewalt drill.
  • Delivered complete ready to use.
  • No drill-twist to injure fingers or wrist.
  • Cut Holes up to 4-1/2″ in steel pipe from 1″ thu 10″ or larger with additional chain.
  • Operate like a portable drill press for field and shop applications, T

    Toggle Wings
    Posted in Fire Sprinkler Installation, Fire Sprinkler Jobs | No Comments »
    Zinc-plated for corrosion resistance.
    Model Size
    900-01690 3/8″

    HT-90E Test Pump
    Posted in Fire Sprinkler Jobs | No Comments »
  • Light Weight.
  • 1/2 H.P. Ball bearing motor (115V) with capacitor starting.
  • All brass pipe and fittings.
  • Up to 300 P.S.I. operating design.
  • Check valve holds system pressure if pump is unplugged.
  • Liquid-filled pressure gauge positioned on system-side of check valve for convenient reading.
  • Sturdy, easy-carry handle.
  • Carrying weight only 32 lbs.
  • Compact design 12″L x 12″W x 13″H.
  • Furnished with 10 feet of hose with a quick-disconnect and check valve.
  • Suction-side strainer to minimize the potential of plugging.
    		•

    Sign Chain
    Posted in Fire Sprinkler Fabrication | No Comments »
    Zinc plated for corrosion resistance. Suitable for use in exposed areas.
    Model Description
    900-0100 #16 Sign Chain (100ft Rolls)

    « Previous Entries
    Next Entries »

  • Latest News

  • Archives

  • Tags

    • GOOGLE AD HERE